UlsterRadar Plug & Play Raspberry Pi ADS-B Receiver Package
A complete, pre-configured ADS-B aircraft tracking receiver package designed for use with
UlsterRadar.com.
The system is supplied configured and ready to receive live aircraft transmissions on
1090 MHz and securely contribute aircraft data to the UlsterRadar receiver network.
Supplied on a not-for-profit basis.
This package is intended to help improve independent ADS-B coverage across Northern Ireland,
Ireland and the wider UK. The package price is designed to cover the hardware, preparation,
configuration and associated costs rather than generate profit from receiver hosts.
What's Included
-
Raspberry Pi Receiver Computer
Fully configured with the required aircraft tracking and UlsterRadar feeder software.
-
High-Quality 32GB+ MicroSD Card
Supplied installed with the operating system and receiver software.
-
1090 MHz ADS-B USB Receiver / SDR
Receives ADS-B and Mode-S aircraft transmissions.
-
1090 MHz External Antenna
Purpose-designed for aircraft reception on 1090 MHz.
-
High-Grade Low-Loss Antenna Cable
We use good-quality, low-loss coaxial cable rather than lightweight budget cable.
This is particularly important at 1090 MHz, where poor cable can significantly reduce
the signal reaching the receiver.
-
Quality RF Connectors & Adapters
Correct connectors and adapters are supplied to suit the antenna, cable and ADS-B receiver.
-
Raspberry Pi Power Supply
Correct regulated power supply for reliable continuous operation.
Pre-Configured Software
- UlsterRadar feeder software installed and configured
- readsb aircraft receiver software
- Local live aircraft map
- Automatic startup following a reboot or power interruption
- MLAT-ready configuration
- Receiver health and online status monitoring
- Designed for continuous 24/7 operation
Remote Support & UlsterRadar Link
Your receiver will be linked to the UlsterRadar system.
This allows the receiver to contribute live aircraft data to the network and also gives us
the ability to remotely access the UlsterRadar receiver software if technical assistance is
required later.
This can help us diagnose receiver problems, check feeder status, update configuration or
provide support without requiring you to understand Linux or Raspberry Pi administration.
Remote access is used for support and maintenance of the UlsterRadar receiver system and
should not provide access to unrelated computers or devices on your home or business network.
Network Connection Required
Important:
You will need to connect the receiver to your local network using either
Ethernet or Wi-Fi.
Ethernet:
No network configuration is normally required. Simply connect an Ethernet cable between the
Raspberry Pi and your router or network.
Wi-Fi:
Wi-Fi must be configured for your own wireless network.
To do this, the Raspberry Pi will need to be temporarily connected to a
keyboard, mouse and monitor.
What Can It Receive?
The receiver listens directly to aircraft transmitting on 1090 MHz. Depending on the aircraft
and the transmissions available, this can include:
- Commercial aircraft
- Private and general aviation aircraft
- Helicopters
- Military aircraft where transmissions are available
- ADS-B equipped aircraft
- Mode-S aircraft
Reception Range
Reception range depends heavily on antenna height, surrounding terrain, buildings and the quality
of the antenna installation.
For the best performance, the antenna should be mounted externally and as high as reasonably
possible with a clear view towards the horizon.
The use of a proper 1090 MHz antenna and high-grade low-loss coaxial cable
helps minimise signal loss between the outdoor antenna and the receiver.
Local Aircraft Map
The receiver includes its own local aircraft map, allowing you to view aircraft being received
directly by your station from another computer, tablet or phone connected to the same network.
UlsterRadar Network
Once connected to the internet, the receiver automatically contributes aircraft data to
UlsterRadar.com, helping improve aircraft tracking coverage across Northern Ireland,
Ireland and the wider UK.
Your receiver can be registered and tested with UlsterRadar before dispatch and is configured
to automatically reconnect following normal reboots or power interruptions.
Privacy
The publicly displayed receiver position can be offset so your exact antenna location does not
need to be shown publicly.
Ideal For
- Aviation enthusiasts
- Flying clubs
- Airfields
- Aircraft owners
- Schools and STEM projects
- Radio enthusiasts
- Anyone wishing to contribute to the UlsterRadar receiver network
Optional Extras
Additional antenna cable, higher-gain antennas, mast brackets, chimney mounting equipment and
other installation accessories can also be supplied where required.
Plug it in. Mount the antenna. Connect it to your network. Join UlsterRadar.